Canon EOS 650D Instruction Manual page 281


With Easy printing, you can print another image using the same settings. With Easy printing, you can print another image using the same settings. With Easy printing, you can print another image using the same settings.
Just select the image and press the < Just select the image and press the < Just select the image and press the <
number of copies will always be 1. (You cannot set the number of number of copies will always be 1. (You cannot set the number of number of copies will always be 1. (You cannot set the number of
copies.) Also, any trimming (p.283) will not be applied. copies.) Also, any trimming (p.283) will not be applied. copies.) Also, any trimming (p.283) will not be applied.

The [Default] setting for printing effects and other options are the
printer's own default settings as set by the printer's manufacturer. Refer
to the printer's instruction manual to find out what the [Default] settings
are.

Depending on the image's file size and image-recording quality, it may
take some time for the printing to start after you select [Print].

If image tilt correction (p.283) is applied, it may take longer to print the
image.

To stop the printing, press <
[OK].

If you execute [Clear all camera settings] (p.210), all the settings will
revert to their defaults.
5
Set the date and file number
imprinting.

Set them if necessary.

I
Select <

Set as desired, then press <0>.
6
Set the number of copies.

Set it if necessary.

Select < R

Set the number of copies, then press Set the number of copies, then press Set the number of copies, then press
<0>.
7 Start printing. Start printing. Start printing.

Select [ Select [ Select [Print], then press <0>.
l
> button. With Easy printing, the
0
> while [Stop] is displayed, then select
>, then press <0>.
>, then press < >, then press < >, then press <0>.
wPrinting
281