Tv Settings - AOC LE42K09D User Manual

TV settings

The setting is available only in TV mode.
Item Description
TV automatically searches for the channel in the available frequency band and stores
sequentially
Channel scan
Press the OK key to enter the interface. Press the pπ to select [Yes] and press the OK key to
start scanning channels.
Scan the wireless channels or cable channels the TV set can receive in your area automatically.
Search for the channels manually and store it to the desired channel number.
Enter the required channel frequency using remote number key in [Start Frequency] window.
Manual channel
Press the pπ key to select [Scan Upward] or [Scan downward] and start scanning from the initial
scan
frequency.
To skip the unwanted channel while changing the channels.
Select channels to be skipped by pressing OK key.
Tips:
1. The selected channel is skipped when you press CH +/- on your remote control.
Channel skipping
2. Press the Numeric buttons on the remote control to access the skipped channel.
3. To un-skip the channel, enter into Channel skip sub menu and un-select the channels not
to be skipped from the channel list.
It is used to interchange the channels. So that you can arrange tuned channels as per your
requirements.
Channel sort
Select the channels to be interchanged by pressing OK.
Channel swap can be done only between two channels.
Used to edit the channel parameters like Channel number, Channel name, Frequency, Color
systerm and Sound system.
Channel edit
Press the oœ key to select the channel and then press the OK key to enter into the sub menu.
Press π key to edit the channel information.
Fine tune the analog channel manually when the quality of reception is poor.
Channel fine
Press the oœ key to select channels and press the OK key to enter into sub menu. Press the
tune
pπ key to fine tune the channel.
TV
Channel Scan
Manual Scan
Channel Skip
Channel Sort
Channel Edit
Channel Fine Tune
24