Advertisement
AC Powered, Digital Display, Plug-In
Carbon Monoxide Alarm
Architectural and Engineering
Specifications
The carbon monoxide alarm shall be Kidde Unit Number KN-COPP-3
(part number 900-0076) or approved equal. It shall be powered by a
120VAC, 60 Hz source along with a 9V battery back up. The tempera-
ture operating range shall be between 40˚F and 100˚F (4˚C and 38˚C)
and the humidity operating range shall be 5% - 95% relative humidity.
The CO sensor shall be of a fuel cell design and shall meet the
sensitivity requirements of Underwriters Laboratories UL2034 Single
and Multiple Station Carbon Monoxide Alarms. The unit shall provide
accuracy of +/-20% + 15 parts per million (ppm) when reading CO con-
centration levels.
The alarm shall include an attached plug that can be installed in any
outlet following the UL/NFPA/Manufacturer's recommended guidelines.
The plug can be snapped into the back of the unit and shall be capable
of being rotated so the alarm remains vertical independent of whether
the electrical socket is mounted vertically or horizontally. In addition,
the alarm plug will have an attached extension cord so the unit can be
plugged into the wall outlet and then placed on a table or shelf.
The unit shall incorporate a digital display that meets the sensitivity
requirements of UL 2034. The display will identify the levels of CO in
parts per million (ppm) once that level reaches 30ppm (i.e.: "abnormal"
levels). The display will have a red dot in the lower right corner that will
blink to indicate the normal operation.
The alarm shall include a test button that will electronically simulate
the presence of CO and cause the unit to go into alarm. This sequence
tests the unit's electronics to ensure proper operation.
In accordance with UL 2034, the CO sensor will not alarm to levels
of CO below 30 ppm and will alarm in the following time range when
exposed to the corresponding levels of CO.
70 ppm CO concentration
150 ppm CO concentration
400 ppm CO concentration
The alarm shall include a piezoelectric horn that is rated at 85
decibels at 10 feet. When the unit detects carbon monoxide, the
alarm pattern will be four (4) short beeps – followed by five (5) seconds
of silence – followed by four (4) short beeps. A number reading will
appear on the digital display identifying the measured CO concentration
(in ppm).
Ordering Information
UPC: 7-84908-00760-5
Part
Number
I 2 of 5
900-0076**
N/A
900-0076-01
107 84908 00760 2
900-0076-14
407 84908 00760 3
900-0076-16
207 84908 00760 9
900-0076-036
307 84908 00760 6
21005294
047871 05294 3
**Not for sale by individual unit
1016 Corporate Park Drive
Mebane NC 27302
1-800-880-6788
www.Kidde.com
60 – 240 minutes
10 – 50 minutes
4 – 15 minutes
Pack Quantity
Individual
PDQ (2 units)
Master Pack (4 units)
Cut Case (12 units)
Power Tower (36 units)
Bulk Pack (6 units)
Part Number 900-0076
Model KN-COPP-3
The unit shall include a peak level memory feature that will store
the peak CO level sensed since the unit was last reset. The peak CO
level stored in the unit's memory shall be displayed (in ppm) on the
digital display by pressing the appropriate button on the unit. The
memory shall also be capable of being reset.
The unit shall also indicate a low battery warning utilizing each of
the following methods: a brief alarm chirp occurring approximately
once per minute and having "Lb" displayed on the digital display.
The unit shall be listed to UL 2034. It shall also include a 5-year
manufacturer's limited warranty.
Technical Specifications
Part Number:
Model:
UPC Number:
Power Source:
Sensor:
Audio Alarm:
Temperature Range: 40˚F (4.4˚C) to 100˚F (37.8˚C)
Humidity Range:
Size:
Weight:
Interconnects:
Wiring:
LED:
Warranty:
3.75"
Dimensions
(w x d x h inches)
7.25 x 2 x 10.75
8 x 6.25 x 11.25
7.5 x 12 x 11.5
14.75 x 17.5 x 12
20 x 24 x 41 (incl. pallet)
12.5 x 6.25 x 7
Distributed by:
900-0076
KN-COPP-3
7-84908-00760-5
120VAC
Electrochemical
85dB at 10ft
5%-95% relative humidity (RH)
6.0625"L x 3.75"W x 1.75"H
1lb
No
Plug-In
Displays CO concentration in PPM
5 year limited
1.75"
6.0625"
Case/
Layers/
Weight
Skid
Skid
1lb
N/A
N/A
3lbs
105
3
5lbs
100
5
14lbs
18
3
40lbs
3
3
6lbs
105
3
KL-900-0076 sheet
rev. 01-2009
Skid
Weight
N/A
475lbs
660lbs
300lbs
120lbs
630lbs
Advertisement
