Miele CVA 6800 Operating And Installation Instructions page 85

Tip: It is useful to have somewhere at
the height of the niche to place the
machine on. This makes electrical
connection easier.
^ Using the large allen key, unscrew all
four feet underneath the machine out
by approx. 2 mm.
The feet can be unscrewed by up to
approx. 10 mm.
^ Connect the machine to the electrical
supply.
^ Push it all the way into the niche until
you feel resistance.
Take care not to damage the
electrical connection when pushing
the coffee machine into the niche.
^ Check the height of the machine to
make sure that it is sitting centrally in
the niche and that it is level. If this is
not the case, realign the machine
with using the four feet underneath.
Four M5 hexagon socket screws are
supplied for aligning and securing the
machine in its niche.
^ Open the front of the machine and
partially tighten the side socket
screws.
^ Carefully turn lower socket screws to
centre the machine in the niche.
^ Tighten both upper socket screws by
hand to secure the machine in the
unit. Do not overtighten them.
Installation
85