Satechi Cyclone Micro 2 User Manual page 37

Maintenance
Maintenance Maintenance Notice: Maintenance
To protect the normal use of all accessories, please make sure you
understand and pay attention to the following points.
� Only use power adapters with power input AC100 ~ 240V, output DC
5V/2A. Using power adapters of any other specification may result in
the device being damaged beyond repair.
� Under normal working conditions, the power adapter will be warm.
Please keep the Cyclone Micro 2 and its power adapter in a well
ventilated area.
� Do not place the device on the bed, sofa or similar surface as this may
inhibit the device's ventilation.
� Do not attempt to repair the device yourself or disassemble it. Even
when the device is unplugged from the mains power, it may still hold
enough charge to cause serious harm.
� If the power cord is broken or has become stripped of its protective
layer, it is highly advised to switch off the device and remove the power
cord immediately.
� If the device has come into contact with any liquid, it is highly advised
to switch off the device immediately and remove the power cord from
the mains power.
� Do not place any foreign objects on top of the device as this may cause
interference with the Cyclone Micro 2.
Notice:
Notice: Notice:
Cyclone Micro 2 Multimedia Player
Page 37.
Version 0.7