Table of Contents
Advertisement
HD Interface Cable:
Connecting your Cyclone Micro 2 to your TV via
highest quality of visual output and high quality audio in a single cable.
output can provide video resolutions of up to 1080p**.
Connect the
HD Interface
back of the Cyclone Micro 2. Connect the other end of the cable to your
TV
HD Interface
input port.
Switch on your TV and select
Press the STANDBY button on the remote control to switch on the Cyclone
Micro 2.
* Please note
HD Interface
** Please note that the device can display 720p / 1080i and 1080p resolutions,
however not all HDTVs are able to display higher resolutions. Please consult
TV user manual.
USB
USB
Host
Host
Interface:
Interface:
USB
USB Host
Host Interface:
Interface:
The Cyclone Micro 2 comes with a single USB Host port, allowing for quick
and easy external media storage expansion. It is compatible with standard
external hard disk drives, flash drives, card readers and other data storage
devices.
To connect your external hard disk drive to your Cyclone Micro 2, please turn
off the media player. Connect the USB
hard disk drive and the media player.
* Please note USB cable is not supplied with this product.
Please note that some external hard disk drives may require more power than
a standalone USB port can provide. In such cases please use the AC adapter
included with your external hard disk drive.
cable*
to the
HD Interface
HD Interface
mode, if required.
cable is not included with this
cable*
Cyclone Micro 2 Multimedia Player
provides the
output interface on the
product.
to the USB port on the external
Page 12.
Version 0.7
Advertisement
Table of Contents
