Table of Contents
Advertisement
Image
Image Playback:
Image
Image
Playback:
Playback:
Playback:
Playing image files using the Cyclone Micro 2 is very simple and supports a
variety of image formats.
Using the Cyclone Micro 2 remote control, navigate to "Picture" and press
ENTER to select it. This will activate the picture filter and take you to the
device list.
E.g., if you want to view pictures that are stored on an attached USB hard
drive, select USB Disk.
When the device type has been selected, use the navigation buttons on the
remote control to select the partition for the media player to access.
After you have located the image file you wish to view, highlight it. You will
notice that a small preview of the image file in place of the picture icon.
Cyclone Micro 2 Multimedia Player
Once in the device list, use the navigation
buttons to select the device type the media is
located in. Depending on the size of the hard
drive and the number of files it contains, it
may take a few moments to detect.
Page 23.
Version 0.7
Advertisement
Table of Contents
