Fog Lamps; Taillamps, Turn Signal; Stoplamps, And Back-Up - Chevrolet Spark 2015 Owner's Manual

2. Turn the bulb socket
counterclockwise and pull it out
of the lamp housing.
3. Pull the bulb straight out of the
bulb socket.
4. Install the new bulb into the
socket by pressing it in.
5. Install the socket into the lamp
housing by turning it clockwise.

Fog Lamps

To replace the front fog lamp bulb:
1. Locate the fog lamp under the
front fascia.
2. Disconnect the electrical
connector from the fog lamp bulb
assembly.
3. Remove the bulb by turning it
counterclockwise and pulling it
straight out of the assembly.
4. Install the new bulb by turning it
clockwise into the assembly.
5. Reverse Steps 1 3 to reinstall.
Vehicle Care

Taillamps, Turn Signal,

Stoplamps, and Back-Up

Lamps
1. Stoplamp/Taillamp
2. Turn Signal Lamp/Taillamp
3. Back-up Lamp
To replace a taillamp, turn signal
lamp, stoplamp, or back-up bulb:
1. Open the liftgate. See Liftgate
on page 2-8.
10-27