Washer Fluid; Brakes - Chevrolet Spark 2015 Owner's Manual

If there is no sign of steam, idle the
engine for three minutes while
parked. If the warning is still
displayed, turn off the engine until it
cools down.

Washer Fluid

What to Use
When windshield washer fluid is
needed, be sure to read the
manufacturer's instructions before
use. If operating the vehicle in an
area where the temperature may fall
below freezing, use a fluid that has
sufficient protection against
freezing.
Adding Washer Fluid
Open the cap with the washer
symbol on it. Add washer fluid until
the tank is full. See Engine
Compartment Overview on
page 10-7 for reservoir location.
Caution
Do not use engine coolant
(antifreeze) in the windshield
washer. It can damage the
windshield washer system
and paint.
Do not mix water with
ready-to-use washer fluid.
Water can cause the solution
Caution (Continued)
to freeze and damage the
washer fluid tank and other
parts of the washer system.
When using concentrated
washer fluid, follow the
manufacturer instructions for
adding water.
Fill the washer fluid tank only
three-quarters full when it is
very cold. This allows for fluid
expansion if freezing occurs,
which could damage the tank
if it is completely full.

Brakes

Disc brake pads have built-in wear
indicators that make a high-pitched
warning sound when the brake pads
are worn and new pads are needed.
The sound can come and go or be
heard all the time when the vehicle
(Continued)
is moving, except when applying the
brake pedal firmly.
Vehicle Care 10-19