Chevrolet Spark 2015 Owner's Manual page 218

The cruise control light on the
instrument panel cluster turns green
after the cruise control has been set
to the desired speed.
1. Press to turn the cruise
system on.
2. Get up to the desired speed.
3. Press and release SET/ .
4. Remove foot from the
accelerator.
The cruise control indicator on the
instrument cluster turns green after
cruise control has been set to the
desired speed. See Instrument
Cluster on page 5-8.
Resuming a Set Speed
If the cruise control is set at a
desired speed and then the brakes
are applied or is pressed, the
cruise control is disengaged without
erasing the set speed from memory.
Once the vehicle reaches about
40 km/h (25 mph) or more, press
RES/+ briefly. The vehicle returns to
the previous set speed.
Increasing Speed While Using
Cruise Control
If the cruise control system is
already activated:
Press and hold RES/+ until the
vehicle accelerates to the
desired speed, then release it.
To increase vehicle speed in
small increments, briefly press
RES/+. For each press, the
vehicle goes about 1.6 km/h
(1 mph) faster.
The speedometer reading can be
displayed in either English or metric
units. See Driver Information Center
(DIC) on page 5-22. The increment
value used depends on the units
displayed.
Driving and Operating
Reducing Speed While Using
Cruise Control
If the cruise control system is
already activated:
Press and hold SET/ until the
desired speed is reached, then
release it.
To decrease the vehicle speed in
small increments, briefly press
SET/ . For each press, the
vehicle goes about 1.6 km/h
(1 mph) slower.
The speedometer reading can
be displayed in either English or
metric units. See Driver
Information Center (DIC) on
page 5-22. The increment value
used depends on the units
displayed.
9-31