Chevrolet Camaro 2015 Owner's Manual page 50

4. Remove the trim cover to access
the hydraulic pressure
release bolt.
5. Locate the pressure release bolt
on the top of the hydraulic pump.
6. Using the provided wrench, turn
the pressure release bolt
counterclockwise no more than
one turn.
7. Reinstall the trim cover.
8. Pull the front of the convertible
top up and forward.
9. After the convertible top is
completely raised, release the
convertible top front latch from
the lock position by pulling down
and turning it clockwise.
Keys, Doors, and Windows
10. Lock the convertible top front
latch by pulling down and
turning it counterclockwise,
then push it up.
When power is restored to the
vehicle, the pressure release bolt
must be tightened using the
provided wrench by turning it
clockwise. The convertible top
button can then be used to lower or
raise the convertible top.
If the convertible top is operated
multiple times, the engine should be
running to prevent drain on the
vehicle's battery. Under certain
conditions, the Driver Information
Center (DIC) may display a
message regarding the convertible
top. See Convertible Top Messages
on page 5-33.
If the battery has been
disconnected, the power windows
must be programmed for the
convertible top to operate. See
Power Windows on page 2-16.
2-23