Connecting Drain Hose; Before Connecting; Connect The Elbow Hose; Place The Drain Hose - LG WF-T5001(~2)PC(H/P) Owner's Manual

C
onnecting Drain Hose
Before connecting Drain Hose, check your Drain Hose model and choose the
correct instructions of followings.
Pump Model
1
Fit the machine end of the drain hose to the outlet
of the drain pump and tighten the clamp.
2
Put the other end of the drain hose over the standpipe or
wash tub.
Note
To prevent siphoning, the drain hose should not extend more than 50mm from the end of the hose guide.
The discharge height should be approximately 0.9 ~ 1.2 m from the floor.
Non-Pump Model
1

Before connecting

Ensure that the hose clip is set as indicated here.
2

Connect the Elbow Hose

Push the elbow hose toward the body of the
washing machine.
3

Place the Drain Hose

To change the direction of the hose, pull out the
elbow hose and change the direction.
Repeat Step2.
Hose
Guide
0.9~1.2m
Clip
21
Drain Hose