LG WF-T5001(~2)PC(H/P) Owner's Manual page 13

3
The pulsator rotates for 8
seconds to detect the
laundry load.
Then the water level and
the amount of detergent to
be used will be shown and
water will be supplied.
4
4
4
5
The water level and the
amount of detergent to be
used will be shown and
water willl be supplied.
Close the lid
5
Water will be supplied When the wash
for 2 minutes after the program ends, the
start of the wash to buzzer will ring for 10
supplement the water seconds before the
the laundry has Power goes off
absorbed. automatically.
6
6
6
7
Finish
6
If water is already in the tub, or putting wet
laundry into the tub before starting will
increase the water level.
With lightweight bulky loads, water level can
be set low.
Changes to water temperature (hot/cold) and
wash level are possible during operation.
(refer to p 10)
7
7
When setting the water level manually, do not
set to MEDIUM to prevent damage to
laundry.
7
Washing with hot water may damage the
laundry (Water is set to cold automatically).
Ensure that the load is under 2kg
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing may
still contain some water. This is normal.
Soak Wash cannot be selected for the Wool
Wash program.
8
Caution & Note
13