Installation - Zanussi FCS 825 C User Manual

Programme
Rinses
Drain
Spin
1) «Cottons Eco» at 60°C with a load of 3 kg is the reference programme for the data entered in the energy label, in compliance with
EEC 92/75 standards.
The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the
quantity and type of laundry, on the inlet water temperature and on the ambient temperature.

Installation

Lifting the machine
Be careful when lifting the machine. Incorrect methods of
lifting can cause physical injuries and also increase the
risk of damage to the machine. Open the door and take
hold of the top inside of the door opening. You can also
lift the machine by gripping the rear overhang of the top.
Warning! Never lift the machine by gripping it's
control panel, door, or detergent dispenser.
Unpacking
When supplied the washing machine is packed using a
number of locking devices/packing pieces to prevent
drum and motor from damage in transit All transit bolts
and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they can
be refitted if the machine ever has to be transported again.
Energy consumption
(KWh)
0.03
-
-
Water consumption (litres)
30
-
-
Spread some of the poly-
styrene packaging materi-
als on the floor behind the
machine and then lay the
machine carefully rear
side down on them. Make
sure that no hoses are
crushed in the process.
Return machine to it's upright position and remove the
power supply cable and the draining and inlet hose
from the hose holders on the rear of the appliance.
Programme duration (Mi-
nutes)
~ 27
~ 1
~ 5
Remove the polystyrene
base from the bottom of
the appliance.
17