System Connections; Cable Connections - Safesight SC9003 Installation Manual And User's Manual

Safesight SC9003 Back up camera system

6. System connections

There are several ways to install this system. We will only discuss the way we recommend
installing the system so that it can be used in many different ways. You will be able to turn
the system on at any time and the system will automatically turn on when the vehicle is
placed in reverse.

6.1 Cable connections

Key Location
1.
Camera
2.
Camera
3.
Extension cable
4.
Extension cable
5.
Extension cable
Connector
Yellow female RCA Cable
Red DC Power connector
Red DC Power connector
Yellow male RCA Cable
Red bare wire
Page 14
www.qualitymobilevideo.com
Use
This connects to the yellow
RCA cable on the extension
cable.
This connects to the Red DC
power connector on the
extension cable.
Connects to the Red DC power
connector #2.
Connects to the yellow female
RCA cable #1.
This is the 12 volt positive
power connection for the
camera. This will connect to
the same location you get
power from.