Sliding Body Shelves With Rear Hangers; Butter & Cheese Section; Sliding Body Shelves - Beko KQE 1050 Manual

Sliding Body Shelves With
Rear Hangers

Sliding body shelves with rear hangers

can be moved back and forth. Height
of these shelves can be adjusted by
removing and then installing them
to upper or lower positions. Raise
the shelf up slightly and pull towards
yourself to remove it.
Butter & Cheese Section
You can store food such as butter,
cheese, and margarine in this section
which has a lid.

Sliding Body Shelves

Sliding body shelves can be pulled
by slightly lifting up from the front and
moved back and forth. They come to
a stop point when pulled towards front
to allow you reach the foods placed at
the back of the shelf; when it is pulled
after slightly lifted upwards at the
second stop point, the body shelf will
be released.
The shelf should be hold tightly from
the bottom as well in order to prevent
it from tipping over. The body shelf is
placed on the rails at the sides of the
refrigerator body by bringing it to one
lower or one upper level.
The body shelf should be pushed
backwards to seat it completely.
18
EN
1
2
3
4