Makita 6935FD Instruction Manual page 8

005944
005945
B) Installation
Remove the battery cartridge from the tool.
Place the tool in a stable and level surface.
Hold both hooking ends in the upper position and
expand the upper part of the hook.
1
005946
Insert both ends, one by one, of the hook into the
grooves in the tool housing.
1
005947
1. Hooking ends
1. Groove in the
housing
8
005948
Keeping the hook in this position, rotate it upwards to the
angle 90°and push both ends fully in the direction of
arrow as shown in the figure.
005949
005950
Storing the tool in the standard carrying case
005951
The tool can be stored with the hook installed on it.
Always place the tool inside the carrying case so that the
installed hook faces upward.
When the hook is installed on the right side of the tool in
back view, place the tool upside down with the hook
facing up.