Ford 2005 P207 Explorer Sport Trac Owner's Manual page 243

Fluid Ford Part Name
Engine coolant Motorcraft Premium
4
Gold Engine
Coolant
(yellow-colored)
Front axle Motorcraft SAE
lubricant 80W-90 Premium
Rear Axle Lubricant
Rear axle Motorcraft SAE
5
lubricant 75W-90 Fuel
Efficient High
Performance
Synthetic Rear Axle
Lubricant
Windshield Motorcraft Premium
washer fluid Windshield Washer
Concentrate
1
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON and MERCON V are not interchangeable. DO NOT
MIX MERCON and MERCON V. Refer to the Scheduled Maintenance
Guide to determine the correct service interval.
2
Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
the dipstick's normal operating range.
3
Fill to bottom of filler plug hole.
4
Add the coolant type originally equipped in your vehicle.
5
Fill to 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of filler
plug hole.
6
Rear axles containing synthetic lubricant are lubricated for life. These
lubricants are not to be checked or changed unless a leak is suspected or
service is required. The axle lubricant should be changed any time the
axle has been submerged in water.
Add 118 ml (4 oz.) of Additive Friction Modifier XL-7 or equivalent for
complete refill of Traction-Lok axles.
REVIEW COPY
2005 P207 Explorer Sport Trac (p27), Owners Guide (post-2002-fmt) (own2002),
Market: USA_English (fus)
Maintenance and Specifications
Application
4.0L SOHC V6
engine
4x4 vehicles
8,8 inch
conventional
and
Traction-Lok
6
axles
All
Capacity
13.2L (14.0
quarts)
1.7L (1.8
quarts)
2.9-3.1L
(5.5-5.8 pints)
2.6L (2.7
quarts)
243