3.1.7 Removing the front VFD board
(See Fig.15)
• Remove the top cabinet, the rear cabinet, the AMP board,
5DVD mechanism assembly and the front cabinet assembly.
(1) From the inside of the front cabinet assembly, remove the
four screws P attaching the front VFD board.
(2) Take out the front VFD board from the front cabinet assem-
bly and disconnect the card wire from the connector
FW102
on the forward side of the front VFD board.
P
Front VFD board
Front cabinet assembly
Fig.15
P
FW102
(No.MB556)1-11