Menu Background; Feature Menu; Menu Timeout; Sleep Timer - Sanyo CE19LD08DV-B Instruction Manual

Store
Press " " or " " button to select Store. Press " "
or OK button to store the settings. "Stored..." will be
displayed on the screen.

Feature Menu

Sleep Timer

Press " " or " " button to select Sleep Timer. Use
" " or " " button to set the Sleep Timer.
The timer can be programmed between Off and 2
hours (120 minutes) in steps of 10 minutes.
If Sleep Timer is activated, at the end of the selected
time, the TV goes automatically to standby mode.

Child Lock

Press " " or " " button to select Child Lock.
Use " " or " " button to set the Child Lock On or Off.
When On is selected, the TV can only be controlled
by the remote control. In this case the control panel
buttons will not work, except for the Standby/On
button. When Child Lock is activated you are able to
switch the TV into Standby mode with the Standby/
On button. To switch the TV on again, you need the
remote control.
Hence, if one of those buttons is pressed, Child Lock
is On will be displayed on the screen when the menu
screen is not visible.
Language
Press " " or " " button to select Language. Use " "
or " " button to select the Language.

Default Zoom

While zoom mode is set as AUTO, the TV will set
the zoom mode in accordance with the signal of
the broadcast. If there is no WSS or aspect ratio
information, the TV will then use this setting to adopt.
Press " " or " " button to select Default Zoom. You
can set Default Zoom to 16:9, 4:3, Panoramic or
14:9 by pressing " " or " " button.

Blue Background

If the signal is weak or absent, the TV will automatically
change to a blue screen. To enable this, set Blue
Background to On.
By pressing "
Background. Press " " or " " button to set Blue
Background as On or Off.

Menu Background

Press " " or " " button to select Menu Background.
You can set menu background level by pressing "
" or " " button.

Menu Timeout

To set a specifi c display timeout for menu screens,
set a value for this option.
Press " " or " " button to select Menu Timeout. Use
" " or " " button to change menu timeout to 15 sec,
30 sec or 60 sec.
TXT (Teletext) Language
Press " " or " " button to select Teletext Language.
Use " " or " " button to change Teletext Language to
West, East, Cyrillic, Turk/Gre, Arabic or Persian.
HDMI PC Full Mode
If you want to view PC screen in HDMI mode by using
external connection, HDMI PC FULL MODE option
should be On to adjust the screen ratio correctly. This
item might be inactive in some resolutions.
Note: If you connect an HDMI device and switch the TV to
HDMI mode, this feature will be visible (except for 480p/576p
resolution).

Ext Out

Press " " or " " button to select Ext Out. Use " " or
" " button to set the Ext Out as On or Off.
Note:
For copying from a DVD or VCR device, you should choose
desired source from source menu and turn "On" to EXT Out
from feature menu.
Ext Out should be On in order to use Timers function in the
DTV mode.

Install Menu

Program
Press " " or " " button to select Program. Use " "
or " " button to select the program number. You can
also enter a number using the numeric buttons on the
remote control. There are 200 programme storage
between 0 and 199.
English - 22 -
" or " " button, select Blue