General Guidelines - Elation Professional SIXPAR 200IP User Manual

G E N E R A L G U I D E L I N E S
• N E V E R O P E N
• During the initial operation of this fixture, a light smoke or smell may emit from the
interior of the fixture. This is a normal process and is caused by excess paint in the
interior of the casing burning off from the heat associated with the lamp and will
decrease gradually over time.
• Please make sure there are NO FLAMMABLE MATERIALS close to the fixture while
operating, to prevent any fire hazard.
• Minimum distance of inflammable materials from the surface 1.6 feet (0.5m).
DO NOT attempt installation and/or operation without knowledge how to do so.
•
DO NOT allow operation by persons who are not qualified to operate this type of
•
fixture. Most damages are the result of operations by nonprofessionals.
• Consistent operational breaks may ensure the fixture will function properly for
many years to come.
DO NOT shake fixture, avoid brute force when installing and/or operating fixture.
•
• Always install the fixture with an appropriate safety cable. When installing the
fixture in a suspended environment, always use mounting hardware that is no less
than M10 x 25 mm, also be sure the hardware is insert in the pre-arranged screw
holes in the bracket of the fixture.
• Use the original packaging and materials to transport the fixture in for service.
DO NOT TOUCH
•
and allow approximately 15 minutes for the fixture to cool down before replacing
or serving.
T H I S F I X T U R E
the housing bare-hand during its operation. Turn OFF the power
w w w . e l a t i o n l i g h t i n g . c o m
W H I L E
9
SIXPAR 200IP™ User Manual ver 1
I N U S E !