Displaying Amplifier Status (E-Amp Disp) - Eclipse CD8455 Owner's Manual

Basic operation

Displaying Amplifier Status (E-AMP DISP)

If a DSP Amp is connected, the status of the DSP amp will be
displayed.
Turn the [SEL] button to select E-AMP DISP.
The selected item will be highlighted.
Press the [SEL] button.
The E-AMP DISP mode is activated.
Turn the [SEL] button to select which amplifier
status you wish to display.
When the button is turned, the setting item changes in the
following order and the selected item is highlighted.
E-AMP1 E-AMP2
E-AMP8 E-AMP7
The deck will display all connected amps.
Press the [SEL] button.
The status of the selected amp will be displayed.
Turn the [SEL] button to change display content.
Each turn of the button allows you to toggle through status
categories as follows:
TMP(˚F) TMP(˚C)
Press the [RTN] button.
At this time, other adjustments can also be made in display
adjustment mode.
Press the [DISP] or [RTN] button to exit display
adjustment mode.
[SEL] button
[DISP] button
E-AMP3 E-AMP4
E-AMP6 E-AMP5
CURRENT
58
[RTN] button
VOLTAGE