Assembly; Water Fill; Notes On Location - Aircare MA0800 Use And Care Manual

NOTES ON LOCATION

In order to get the most effective use from your humidifier, it is important to position
the unit where the most humidity is needed or where the moist air will be circulated
throughout the house such as near a cold air return. If the unit is positioned close to a
window, condensation may form on the window pane. If this occurs the unit should be
repositioned in another location.
Do NOT position the unit directly in front of a hot air duct or radiator. Do NOT place
on soft carpet.
Due to the release of cool, moist air from the humidifier, it is best to direct air away
from thermostat and hot air registers. Position humidifier next to an inside wall on a
level place at least 4 inches away from the wall or curtains.

ASSEMBLY

1) Unpack humidifier from carton.
2) Remove all packaging materials. Check to see that you have all of the following
items removed from the box, accessory kit and cabinet before discarding the
packaging:

Evaporative wicking filter

WATER FILL

CAUTION: Before filling, ensure unit is turned OFF. Keep grille dry at all times.
WARNING: To reduce the risk of fire or shock hazard, DO NOT pour or spill water
into control or motor area. If controls get wet, let them dry completely and have unit
checked by authorized service personnel before plugging in.
After the humidifier is positioned where it will be
operating you are ready to fill the humidifier. The
bottle lifts straight up and away from the base.
Take care not to bump or damage fill valve
assembly on the bottom of the bottle.
Invert the bottle. Press the valve stem button into
the bottle and turn clockwise to lock in open
position. Place bottle under the faucet. Fill the
bottle, being careful not to allow any debris to get
in the bottle. Debris may interfere with the valve
seating. Once the bottle is full, press the valve
stem button and turn counter clockwise to release
and close.
b.
:
4

Manual
a.
c.