Canon MX490 Series Online Manual page 214

Note
• You cannot use the same printer name as that already used for other LAN connected devices.
• You cannot use a hyphen for the initial or last character of the printer name.
◦ TCP/IP settings
Performs IPv4 or IPv6 setting.
◦ WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows 8.1,
Windows 8, Windows 7, and Windows Vista).
Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
• When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows
8.1, Windows 8, Windows 7, and Windows Vista.
WSD scan from dev.
Selecting Active allows you to transfer the scanned data to the computer using WSD.
Timeout setting
Specifies the timeout length.
◦ Bonjour settings
Setting items for LAN using Bonjour for Mac OS.
Enab./disab. Bonjour
Selecting Active allows you to use Bonjour to perform the network settings.
Enter service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
• You cannot use the same service name as that already used for other LAN connected devices.
◦ LPR setting
Enables/disables the LPR setting.
◦ DRX setting
Selecting Active allows you to enable discontinuous reception when using wireless LAN. It allows
you to save electricity.
Note
• Depending on the wireless router you are using, discontinuous reception may not be enabled
even though Active is selected.
• Discontinuous reception is enabled only while the machine is on standby. (The LCD is in the
screen saver mode.)
214