Setting Items For Scanning Using The Operation Panel Of The Machine - Canon MX490 Series Online Manual

Setting Items for Scanning Using the Operation Panel of the
Machine
You can change the scan settings such as the scan size, resolution, or data format.
Use the button to select a setting item, then press the OK button.
Use the button to adjust each setting item, then press the OK button. The next setting item is
displayed.
Note
• The * (asterisk) on the LCD indicates the current setting.
• The scan setting cannot be specified under the following conditions:
• When Auto scan is selected for Document type to forward the scanned data to the computer
• When you forward the scanned data to the computer using WSD (one of the network protocols
supported in Windows 8.1, Windows 8, Windows 7, and Windows Vista)
• Some setting items cannot be specified in combination with other setting items, the document type, or
the destination to save the data.
• The settings of the scan size, resolution, and data format are retained even if the machine is turned off.
• When you forward the scanned data to the computer, you can specify the destination and file name
using Canon IJ Scan Utility.
Settings Dialog Box
• If you scan originals from the computer, you can scan with advanced settings. For details on scanning
from the computer:
Scanning Photos and Documents
• Scan size
Select the size of the original.
Ex:
If you select Auto scan(A) -Singl, the machine detects the page size automatically and starts scanning.
If you select Auto scan(A) -Multi to save to the computer, you can scan several originals at a time.
Note
• When Legal is selected, load the original in the ADF.
• When 4"x6", 10x15, 5"x7", 13x18, or Auto scan(A) -Singl is selected, load the original on the
platen glass.
• Some of setting items are not available depending on the country or region of purchase.
• Data format
Select the data format of the scanned data.
Ex:
665