Download Print this page
Insignia NS-GWII1106 Quick Setup Manual

Insignia NS-GWII1106 Quick Setup Manual

Wii and wii u charge station with rechargeable battery packs

Advertisement

Quick Links

Wii™ and Wii™ U charge station with rechargeable
battery packs | NS-GWII1106/NS-GWII1106-C
Package contents
• Rechargeable battery packs for Wii remotes (2)
• Recharging station
• AC power adapter
• Quick Start Guide
Features
• Increases playing time of standard Wii and Wii U remotes
• 100% compatible with Nintendo approved Wii and Wii U remotes
• Recharging status LED indicators
Installing the rechargeable battery packs
1 Remove any silicon skin or jacket that you have on your Wii remotes in order
to access the battery compartment and then remove any batteries in the
compartment.
2 Insert the battery pack into the battery compartment, front end fi rst, then
press the battery pack into place.
Battery
compartment
cover
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
Attaching the AC power adapter
1 Insert the DC power connector into the DC In jack in the back of the
recharging station.
2 Connect the AC power adapter to a standard AC power outlet.
Recharging
Remove any jacket or silicon skins on your Wii remotes - they will not charge with
these on. Make sure that the remote is facing forward. The LED glows red while
the battery is recharging. When recharging is complete, the LED glows blue.
Battery pack
(front end)
Red: Charging in process
Blue: Charging complete
LED indicators
Troubleshooting
Before contacting technical support for help, check the following:
If the remote doesn't work when using the battery pack:
Re-install the battery pack. Make sure it is locked in place.
Use another charged battery pack to determine whether the remote is
damaged or the battery pack's charge is low.
Try to recharge the battery pack.
Make sure that the surrounding temperature is between 41˚ and 86˚F
(5˚C~30˚C)
If the recharging station doesn't charge the remotes:
Make sure that the battery pack is correctly installed on the Wii and Wii U
remotes.
Make sure that you have connected the AC power adapter to the recharging
station and an AC power outlet.
If the battery pack has been stored unused for a long time, it may have
become over-discharged. The recharging station may not be able to recover
the battery.
Make sure that the surrounding temperature is between between 41˚ and
86˚F (5˚C~30˚C).
If battery life seems short and charging takes a long time:
Make sure that the surrounding temperature is between between 41˚ and
86˚F (5˚C~30˚C).
Battery life may decrease over time. After 500 recharges, battery life may be
only 70% of the battery life when new.

Advertisement

loading

Summary of Contents for Insignia NS-GWII1106

  • Page 1 Before contacting technical support for help, check the following: 1 Insert the DC power connector into the DC In jack in the back of the battery packs | NS-GWII1106/NS-GWII1106-C recharging station. If the remote doesn’t work when using the battery pack: 2 Connect the AC power adapter to a standard AC power outlet.
  • Page 2 Product is determined to be defective by an authorized Insignia repair center or store • Damage due to incorrect operation or maintenance personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; • Connection to an incorrect voltage supply or (2) replace the Product at no charge with new or rebuilt comparable products or parts.

This manual is also suitable for:

Ns-gwii1106-c