Insignia NS-CAHCC02-C Quick Setup Manual

QUICK SETUP GUIDE
Charging Case for
Bluetooth Earbuds
NS-CAHCC02 / NS-CAHCC02-C
PACKAGE CONTENTS
• Charging case (with mobile battery pack)
• Micro USB cable (attached to the case)
• Quick Setup Guide
SAFETY INFORMATION
• Do not expose your mobile battery pack to heat,
fire, or water.
• Do not modify, disassemble, open, drop, crush,
puncture, or shred the mobile battery.
• This is not a toy. Young children should be
supervised to make sure that they do not play with
the mobile battery.
• Do not use the mobile battery while charging is in
progress.
Before using your new product, please read these instructions to prevent any damage.
• Recharge the mobile battery before use if it has not
been used for more than 90 days.
• Risk of fire and burns. Do not open, crush, heat above
140°F (60°C), or incinerate. Follow the manufacturer's
instructions.
This product is safe for regular use under normal
conditions. As with any device using electrical power,
some situations may be unsafe and injuries or damages
could result. To minimize or avoid unsafe conditions,
please read and follow the instructions before using.
CHARGING THE MOBILE BATTERY
PACK
Fully charge your mobile battery pack before
using it for the first time.
LED indicator
(not included)
1 Plug the small end of a Micro USB charging cable
(not included) into the mobile battery's IN port.
2 Plug the large end of the cable into a USB port
on your computer, car charger, or wall charger
(not included). The mobile battery begins
charging and the LED indicator lights red.
Notes:
• The LED turns blue when charging is complete.
• The LED blinks red when the mobile battery pack's
battery is low.
CHARGING YOUR BLUETOOTH
EARBUDS
Mobile battery pack
1 Plug the built-in Micro USB connector inside the
case into your earbuds (not included).
Your earbuds begin charging.
Earbuds
(not included)