Canon PowerShot G1X Mark II User Manual page 187

3
Insert the coupler.
Insert the coupler facing the direction
shown, just as you would a battery pack
(following step 2 in "Inserting the Battery
Pack and Memory Card"
Terminals
Make sure the coupler cable passes
through the port.
Coupler Cable Port
4
Close the cover.
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed you slide it, until it clicks into the closed you slide it, until it clicks into the closed
position ( ).
(= 13)).
) and hold it down as ) and hold it down as
5
Connect the power cord.
Insert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
Turn the camera on and use it as desired.
When finished, turn the camera off and
unplug the power cord from the outlet.
• Do not disconnect the adapter or unplug the power cord while Do not disconnect the adapter or unplug the power cord while Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the the camera is still on. This may erase your shots or damage the the camera is still on. This may erase your shots or damage the
camera. camera. camera.
• Do not attach the adapter or adapter cord to other objects. Doing so Do not attach the adapter or adapter cord to other objects. Doing so Do not attach the adapter or adapter cord to other objects. Doing so
could result in malfunction or damage to the product. could result in malfunction or damage to the product. could result in malfunction or damage to the product.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
187