Download  Print this page

Microwave Oven Preparation - KitchenAid MT4110RP Installation Instructions

Microwave oven built-in trim kit
Hide thumbs
   

Advertisement

Microwave Oven Preparation

1. Unplug microwave oven before proceeding with installation.
2. Remove any loose items inside microwave oven.
Trim Kit Installation
1. Install upper trim piece using three 4 mm x 8 mm tapping
screws.
A
A. Upper trim piece
B. 4 mm x 8 mm tapping screws
2. Position duct with open end toward front of microwave oven,
and attach with two 4 mm x 8 mm tapping screws.
A
A. Duct
B. 4 mm x 8 mm tapping screws
3. Remove 2 existing screws from front of base plate and set
B
4. Slide microwave oven partway into cabinet opening. Plug in
B
5. Attach the upper trim piece to the cabinet with two 4 mm x
6. Attach lower trim piece to cabinet with two 4 mm x 16 mm
Installation is now complete. Replace any loose items that have
been removed from microwave oven cavity.
Save this installation instruction for future reference.
aside. Mount lower trim on base plate using two 4 mm x
8 mm tapping screws.
A
B
A. Lower trim piece
B. 4 mm x 8 mm tapping screws
C. Base plate (underside of
microwave oven)
oven and center it in the opening. Install microwave oven in
cabinet enclosure.
16 mm tapping screws.
A
A. 4 mm x 16 mm tapping screws
tapping screws.
C
3

Advertisement

loading

  Related Manuals for KitchenAid MT4110RP