Download  Print this page

KitchenAid MT4110RP Installation Instructions

Microwave oven built-in trim kit
Hide thumbs
   

Advertisement

Quick Links

MICROWAVE OVEN BUILT-IN TRIM KIT
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING." These words mean:
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
IMPORTANT: Save Installation Instructions for local electrical inspector's use.
8205187/3828W5U0370

INSTALLATION INSTRUCTIONS

For countertop microwave oven model MT4110RP

MICROWAVE OVEN SAFETY

Your safety and the safety of others are very important.
®
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.

Advertisement

Table of Contents
loading

  Related Manuals for KitchenAid MT4110RP

  Summary of Contents for KitchenAid MT4110RP

  • Page 1: Installation Instructions

    ® MICROWAVE OVEN BUILT-IN TRIM KIT INSTALLATION INSTRUCTIONS For countertop microwave oven model MT4110RP MICROWAVE OVEN SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
  • Page 2: Grounding Instructions

    INSTALLATION INSTRUCTIONS Tools Recommended Electrical Requirements Assemble the required tools and parts before starting installation. WARNING Read and follow the instructions provided with any tools listed here. Measuring tape Scissors Pencil Phillips screwdriver Parts Supplied Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong.
  • Page 3: Microwave Oven Preparation

    3. Remove 2 existing screws from front of base plate and set aside. Mount lower trim on base plate using two 4 mm x Microwave Oven Preparation 8 mm tapping screws. 1. Unplug microwave oven before proceeding with installation. 2. Remove any loose items inside microwave oven. Trim Kit Installation 1.
  • Page 4 8205187/3828W5U0370 © 2004 Whirlpool Corporation. 5/04 All rights reserved. ® Registered Trademark/TM Trademark of Whirlpool, U.S.A. Printed in Korea...