Automatic Operation (Auto Changeover); Automatic Operation; Fonctionnement Automatique; Fonctionnement Automatique (Permutation Automatique) - Toshiba RAS-07UKHP-E Owner's Manual

AUTOMATIC OPERATION

When you set the air conditioner in AUTO mode, it will automatically select cooling, heating, or fan only
operation depending on the room temperature. (
In addition, fan speed and louver are automatically controlled.
Start
1 1
1 1 1 START/STOP button
Press this button to start the air conditioner.
2 2
2 AUTO button (AUTO) 2 2
Press AUTO button.
• The OPERATION lamp (green) on the display panel of the
indoor unit lights. The operating mode is selected in accordance
with the room temperature and operation starts after approximately
3 minutes.
• If the AUTO mode is uncomfortable, you can select the desired
conditions manually.
Temperature, fan speed and louver position can be changed and
when it is changed, MODE is also changed from AUTO to A.
At the same time, fan speed and louver positioning indications
are indicated.
Stop
START/STOP button
Press this button again to stop the air conditioner.

AUTOMATIC OPERATION (AUTO CHANGEOVER)

When you set the air conditioner in A mode or switch over from AUTO operation because of some settings
change, it will automatically select cooling, heating, or fan only operation depending on the room temperature.
( see page 15.)
Start
1 1 1 1 1 START/STOP button
Press this button to start the air conditioner.
2 2 2 2 Mode select button (MODE) 2
Select A.
3 3
3 3 3 Temperature button (
Set the desired temperature.
• The OPERATION lamp (green) on the display panel of the
indoor unit lights. The operating mode is selected in accordance
with the room temperature and operation starts after approximately
3 minutes.
• When you select the A mode, it is unnecessary to set the fan speed.
The FAN speed display will show AUTO and the fan speed will be
automatically controlled.
• If the A mode is uncomfortable, you can select the desired
conditions manually.
Stop
START/STOP button
Press this button again to stop the air conditioner.
see page 15.)
)
8
AUTO
1 1
START/STOP
2 2
FAN MODE
SWING ECO
TIMER
FIX
ON OFF
FILTER
A
3 3
1 1
START/STOP
FAN MODE
2 2
ECO
SWING
TIMER
FIX
ON OFF
FILTER
PRESET
AUTO
Hi-POWER
MEMO
SET CLR
RESET CLOCK CHECK
PRESET
AUTO
Hi-POWER
MEMO
SET CLR
RESET CLOCK CHECK
EN