Table of Contents
Advertisement
Option B - Reinforced Connection
Follow the procedures below if you plan on using the keyboard frequently and/or prefer a more reinforced/secure connec-
tion between the phone and the K680i Detachable Magnetic Keyboard.
1.
Swing the locking bar of the magnetic connector towards the front of the phone until it clicks in place.
2.
Position your phone back on your desk and, with the bottom of the phone slightly raised, slide the K680i Detachable Magnetic
Keyboard connection pins in between the base of the phone and the locking bar.
Notes:
•
When the keyboard is connected the phone automatically detects the keyboard and the connection status LED on the keyboard
will light up green indicating it is ready to be used.
•
The phone must be on for it to recognize the keyboard.
•
If the LED does not light up or if the keyboard is not functioning correctly, detach the keyboard, reattach ensuring the keyboard's
connection pins are touching the contact area on the phone, and wait 30 seconds. If after 30 seconds, the LED does not light
up, detachthe keyboard and try
41-001519-00 REV00 – 10.2014
again.
Installation
6
Advertisement
Table of Contents
