Table of Contents
Advertisement
Mitel K680i Detachable Magnetic Keyboard Installation Guide
OPTION B - REINFORCED CONNECTION
Follow the procedures below if you plan on using the keyboard frequently and/or prefer a more
reinforced/secure connection between the phone and the K680i Detachable Magnetic
Keyboard.
1. Swing the locking bar of the magnetic connector towards the front of the phone until it clicks
in place.
2. Position your phone back on your desk and, with the bottom of the phone slightly raised,
slide the K680i Detachable Magnetic Keyboard connection pins in between the base of the
phone and the locking bar.
Notes:
1. When the keyboard is connected the phone automatically detects the keyboard
2. The phone must be on for it to recognize the keyboard.
3. If the LED does not light up or if the keyboard is not functioning correctly, detach
8
and the connection status LED on the keyboard will light up green indicating it
is ready to be used.
the keyboard, reattach ensuring the keyboard's connection pins are touching
the contact area on the phone, and wait 30 seconds. If after 30 seconds, the
LED does not light up, detachthe keyboard and try again.
Advertisement
Table of Contents
