Table of Contents
Advertisement
Installation
3.
While the keyboard is in place, insert the provided screw into the magnetic connector's screw lock holes and fasten using a Philips-
head screwdriver.
Note:
The locking bar and screw is not designed to permanently secure the keyboard to the phone. It is used to simply reinforce the con-
nection so that the keyboard does not become accidently dislodged by a light impact. With the locking bar and screw in place, the
keyboard can still be knocked loose if the impact is hard enough.
4.
Position your phone back on your desk and ensure the connection status LED on the keyboard is lit green.
You are now ready to use your K680i Detachable Magnetic Keyboard.
7
41-001519-00 REV00 – 10.2014
Advertisement
Table of Contents
