Page 2
). The information is subject to change without notice and should not be construed in any way as a commitment by Mitel or any of its affiliates or subsidiaries. Mitel and its affiliates and subsidiaries assume no responsibility for any errors or omissions in this document. Revisions of this document or new editions of it may be issued to incorporate such changes.
Equipment for which the Software was intended. This Product may integrate programs, licensed to Mitel by third party Suppliers, for distribution under the terms of this agreement. These programs are confidential and proprietary, and are protected as such by copyright law as unpublished works and by international treaties to the fullest extent under the applicable law of the jurisdiction of the Customer.
WELCOME Congratulations on your purchase of the Mitel K680i Detachable Magnetic Keyboard! The K680i magnetically connected keyboard provides a full keyboard for a more natural typing interface. The keyboard helps to easily facilitate dial by name, directory search, XML applications, and more.
SAFETY SUMMARY This product contains neodymium rare earth magnets. Neodymium magnets are extremely strong and therefore special care is required when handling the K680i Detachable Magnetic Keyboard. Please read the following safety information before using the K680i Detachable Magnetic Keyboard.
K680i Parts K680I PARTS When you unpack the K680i Detachable Magnetic Keyboard package, you should ensure that you have all of the following items. If any part is missing, contact the supplier of your phone. & Backspace Caps Lock “...
Mitel K680i Detachable Magnetic Keyboard Installation Guide INSTALLATION You can install the K680i Detachable Magnetic Keyboard by simply using the strength of the magnets to quickly attach and detach the keyboard to your phone when required or you can utilize the locking bar on the phone-to-keyboard magnetic connector and included screw to attach the keyboard to the phone in a more secure manner.
Page 9
Installation 2. On the back of the phone, locate and remove the rubber cap covering the connection magnet insertion area. 3. Insert the phone-to-keyboard magnetic connector into the area left vacant by the removal of the rubber cap. Note: The magnetic connector should be installed with the visible surfaces of neodymium magnets facing towards the bottom of the phone.
1. Swing the locking bar of the magnetic connector towards the phone so it rests on back of the phone. 2. Position your phone back on your desk and slide the K680i Detachable Magnetic Keyboard towards the magnetic connector until the keyboard snaps into place.
1. Swing the locking bar of the magnetic connector towards the front of the phone until it clicks in place. 2. Position your phone back on your desk and, with the bottom of the phone slightly raised, slide the K680i Detachable Magnetic Keyboard connection pins in between the base of the phone and the locking bar. Notes: 1.
Page 13
4. Position your phone back on your desk and ensure the connection status LED on the keyboard is lit green. You are now ready to use your K680i Detachable Magnetic Keyboard.
Consumer Act 2010 (the ACL), the exercise of a right conferred by such a provision or any liability of Mitel in relation to a failure to comply with a guarantee that applies under Division 1 of Part 3-2 of the ACL to a supply of goods or services.
(e.g. goods/services ordinarily supplied for business-use) 1.1 To the extent permitted by law and subject to clause 1.2 below, the liability of Mitel to you for any non-compliance with a statutory guarantee or loss or damage arising out of or in...