Table of Contents
Advertisement
Mitel K680i Detachable Magnetic Keyboard Installation Guide
OPTION A - MAGNET-ONLY CONNECTION
Follow the procedures below if you plan on using the keyboard infrequently and/or want to be
able to quickly store the keyboard away when not in use:
1. Swing the locking bar of the magnetic connector towards the phone so it rests on back of
the phone.
2. Position your phone back on your desk and slide the K680i Detachable Magnetic Keyboard
towards the magnetic connector until the keyboard snaps into place.
Notes:
1. When the keyboard is connected the phone automatically detects the keyboard
2. The phone must be on for it to recognize the keyboard.
3. If the LED does not light up or if the keyboard is not functioning correctly, detach
6
and the connection status LED on the keyboard will light up green indicating it
is ready to be used.
the keyboard, reattach ensuring the keyboard's connection pins are touching
the contact area on the phone, and wait 30 seconds. If after 30 seconds, the
LED does not light up, detachthe keyboard and try again.
Advertisement
Table of Contents
