Specifications - Panasonic KX-HNC600 Installation Manual

Specifications

R Standards
DECT 6.0 (Digital Enhanced Cordless
Telecommunications 6.0)
R Frequency range
DECT: 1.92 GHz – 1.93 GHz
R RF transmission power
DECT: 115 mW (max.)
R Power source
120 V AC, 60 Hz
R Power consumption
Standby: 1.4 W
During operation:
1.5 W (when the LED lights are not lit)
2.3 W (when the LED lights are lit)
R Operating conditions
-20 °C – 50 °C (-4 °F – 122°F)
up to 90% relative humidity
(non-condensing)
R Transmitting range
Approx. 50 m (160 feet) indoors
Approx. 300 m (1,000 feet) outdoors
R Image sensor
0.3 megapixel CMOS
R Minimum illuminance required
*1
0 lx
R Focal length
Fixed (0.4 m (1.3 feet) – infinity)
R Angular field of view (camera angle)
Horizontal: approx. 70°
Vertical: approx. 50°
R Motion detection method
Pyroelectric infrared sensor (PIR sensor)
and visual sensor
R PIR sensor detection range (when the
surrounding temperature is approx.
25 °C (77 °F))
Horizontal: approx. 70°
Vertical: approx. 20°
Detection range: approx. 5 m
R Visual sensor detection range
Horizontal: approx. 70°
Vertical: approx. 50°
R IP rating
*2
IP55
R Adjustable mounting angles
Horizontal: ±90°
Vertical: facing forward - facing down
approx. 60°
(adjustable when mounting)
For assistance, please visit www.panasonic.com/support
R Dimensions
Approx. 75 mm ´ 75 mm ´ 173 mm (2
15/16 inches ´ 2 15/16 inches ´ 6 13/16
inches)
R Mass (weight)
Approx. 305 g (0.67 lb)
*1 The IR-LED will be lighted at the low
illuminance conditions.
*2 Water resistance is only assured if the
camera is installed correctly according to
the instructions in the Installation Guide,
and appropriate water protection
measures are taken. Do not install the
camera in areas directly exposed to water
or rain.
Appendix
27