Sony TRINITRON KV-20FA210 Service Manual page 93

Connecting a TV and Satellite Receiver
Satellite receiver
1
Satellite
antenna
cable
1
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on
your TV.
3
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your TV.
Using your TV with this connection
This connection allows you to do the following:
Program your Sony remote control to operate your satellite receiver (see page 5).
To activate your remote, press
to operate other functions.
Press repeatedly to switch to satellite receiver input (VIDEO input).
From
cable/
antenna
2
3
to operate your satellite receiver. See page 7 on how
Connecting Your TV
Rear of TV
1 3
AUDIO UDIO
AUDIO UDIO
Video (yellow)
Audio L (white)
Audio R (red)
15