Sony TRINITRON KV-20FA210 Service Manual page 91

TV and Cable Box
1
From cable/
antenna
1
Connect the coaxial cable from your cable service to the IN jack on your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the
VHF/UHF jack on your TV.
Using your TV with this connection
This connection allows you to do the following:
Program your Sony remote control to operate your cable box (see page 5).
To activate your remote press
buttons or CH+/- buttons to change the channels. To do this, first program your remote
control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 28).
Cable box
2
Rear of TV
1 3
AUDIO UDIO
to operate your cable box and then use the
Connecting Your TV
AUDIO UDIO
0 9
13