Using The Remote Control Remote Control Description - Sony TRINITRON KV-20FA210 Service Manual

Using the Remote Control
Remote Control Description
A
B
C
D
E
F
G
H
I
J
Button
1 MUTING
2 SYSTEM OFF
K
3 TV/VCR
L
M
4 PICTURE MODE
5
SLEEP
N
O
6
JUMP
P
Q
7
8
RESET
R
S
9
VOL (volume)
q; CODE SET
T
qa POWER
U
qs FUNCTION
qd VCR/DVD
(operating)
qf TV/VIDEO
qg DISPLAY
qh MTS/SAP
qj and
0 9
ENTER
qk GUIDE
Description
Instantly turns off the sound. Press again or press
to restore the sound.
Powers off all Sony equipment at once (may not
work with older equipment).
Press when you are finished using a VCR and you
want to switch to the TV Antenna input. Your VCR
power will remain on.
Cycles through the available Video Mode settings.
Turns the TV off automatically in approximately 15,
30, 45, 60 or 90 minutes. Cancel by pressing until
Sleep Off appears.
Press to jump back and forth between two channels.
The TV alternates between current channel and the
last channel that was selected.
Press for a direct selection of Effect settings
(Simulated, WOW, SRS, Off) (see page 26).
Press to return to factory settings while in an on-
screen menu.
Press when you want to adjust the volume.
Use to program your remote control to operate
connected video equipment (see page 5).
Press when you want to turn connected equipment
on or off.
Press when you want to control connected
equipment with your remote control.
Operates VCR or DVD. Use when you want to
operate connected VCR or DVD with your remote
control.
Press to cycle through available video inputs.
Press once to show current time (if set) and channel
number. Press again to turn DISPLAY off.
Cycles through the Multi-Channel TV Sound (MTS)
options: Stereo, Mono, and Auto SAP (Second
Audio Program).
Change the channels directly. Press
buttons to select a channel, then press ENTER.
Brings up the custom guide of your satellite
receiver.
0 9
3