To Wind The Bobbin And Disengage The Sewing Mechanism - Pfaff 1213 Instruction Book

Raise both spool pins and place a spool of
thread on one of them. Simply place the
bobbin on bobbin winder disc S where it is
held in position magnetically (see ill, at leffl.
Pass the thread from the spool to the bobbin,
as shown in the above illustration,
Wind the thread clockwise around the bobbin
a few times.
Push lever E against the bobbin, hold the
balance wheel, and turn the stop motion
knob of Pfaft machines 1213 and 1214 (8a
I
The bobbin winder stops automatically when
the bobbin is full,
To re-engage the sewing mechanism after
bobbin winding, turn the stop motion knob
away from you. The sewing mechanism is
re-engaged automatically on starting the
machine,
On the Pfaff 1222-E, the sewing mechanism
is engaged or disengaged by the Stopmatic
control. For details please refer to page 17.
to wind the bobbin and disengage
the sewing mechanism:
on page 2> toward you. Start the bobbin
winder by pressing down on the foot control.