When You Finished Sewing - Pfaff 1213 Instruction Book

When you've finished sewing on your
Pfaff 1222E.
flick the presser bar lifter to its highest posi
tion. Since this lever has been mentioned
repeatedly so far, we're now going to tell you
how it works when set at its various posi
tions:
1. Position A (illustrated below) is used for
threading the needle and removing the fabric.
In this position, the sewing foot is raised and
the sewing mechanism disengaged for bobbin
winding The needle is raised automatically
to its highest point.
3.
Position C (illustrated below) means that
the sewing foot is lowered. When you push
the presser bar lifter to
position
D, the Stop
matic mechanism is engaged (as in position
A). This position is used when the bobbin
thread is to be drawn up, in case of seam
interruptions, when the bobbin becomes
empty, or when the bobbin thread breaks.
Hold the presser bar lifter in its lowest posi
tion until the needle has stopped at its high
est point. When this lever is released, it re
turns automatically to position
C
--I
PMF)
1222
2
Position B (illustrated above) is used when
you need to turn the fabric. The sewing foot
is raised, but the needle remains in the fabric
and serves as a pivot point for turning the
material.
--
With the models 1213/1214 the presser bar
lifter can only be pushed to positions B and C.