Threading The Needle With The Automatic Pfaff Needle Threader - Pfaff 1213 Instruction Book

Threading the need'e with the
automatic Pfaff need'e threader
Make sure the needle is at its highest point,
i. e. on the Pfaff 1222—E the presser bar lifter
at the back of the machine should be in
its upper position (position A on page 17).
On Pfaff machines 1213 and 1214, turn the
balance wheel until the needle is at its highest
point and the take-up lever is in the position
shown in the illustration.
Push the needle threader control down with
your left hand and at the same time place
the needle thread under the hook of the
needle threader (Fig. 1).
Now push the needle threader control down
completely and draw the needle thread
under the threader prong (Fig. 2).
Release the needle threader control slightly
until the prong reverses and pulls the thread
through the needle eye (Fig. 3).
Fully release the control, take hold of the
thread loop and pull the thread through the
needle eye completely.
On Pfaff machines 1213 and 1214, turn the
balance wheel to bring the take-up lever to
its highest point (Fig page 10)
On the Pfaff 1222—E, return the presser bar
lifter to its normal (horizontal) position (B on
page 17).
2
3