Menu Operation; Picture Menu; Audio Menu; Eco Menu - Sharp AQUOS LC-32M300M Operation Manual

Menu operation

1
Press MENU and the MENU screen displays.
2
Press c/d to select the desired menu. (Picture,
Audio, ECO, Setup, Option)
3
Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.
4
Press a/b or c/d to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.

Picture menu

Picture Audio ECO
[ STANDARD]
AV Mode
OPC [Off]
[ + 8]
Backlight –16 +16
Contrast [ +3 0] 0 +40
Brightness [ 0] –30 +30
Colour [ 0] –30 +30
Tint [ 0] –30 +30
Sharpness [ 0] –10 +10
Advanced
Reset
H OPC (Optical Picture Control) setting
You can set the TV to automatically adjust the
screen to suitable backlight brightness according to
the lighting conditions.
Selected item Description
On:Display Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
On Automatically adjusts.
Off The brightness is fi xed at the value set in
"Backlight".
NOTE
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
H Picture adjustments
c button d button
Selected item
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness For more
brightness
Colour For less colour For more colour
intensity intensity
Tint Skin tones become Skin tones become
purplish greenish
Sharpness For less sharpness For more
sharpness
H Advanced
Colour Temp. (Colour Temperature)
Adjusts the colour temperature to give the best white
image.
Selected item Description
High White with bluish tone
Mid-High
Middle
Mid-Low
Low
White with reddish tone
Film Mode
Automatically detects a fi lm-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still
fi lm frame for high-defi nition picture quality. (On, Off)
Active Contrast
Automatically adjusts the contrast of an image according
to the scene. (On, Off)
3D-Y/C
Provides high quality images with minimal dot crawl and
cross colour noise. (On, Off)
NOTE
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
Monochrome
For viewing images in monochrome. (On, Off)
DNR (Digital Noise Reduction)
Reduces noise on screen and produces a clearer video
image. (Off, High, Low, Auto)
NOTE
• For resetting all Picture adjustment items to factory preset
values, press a/b to select "Reset", press ENTER, press
c/d to select "Yes", and then press ENTER.

Audio menu

Audio ECO
STANDARD
Treble [ 0] –15
Bass [ 0] –15
Balance [
0] L
Surround
Reset
H Audio adjustments
c button
Selected item
Treble For weaker treble
Bass For weaker bass
Balance Decrease audio
from the right
speaker
H Surround
When you set to "On", you can enjoy surround
sound, the same as if you were in a movie theatre.
Selected item Description
On Makes it possible to enjoy natural, realistic
surround sound.
Off Outputs the normal sound.
NOTE
• For resetting all Audio adjustment items to the factory
preset values, press a/b to select "Reset", press
ENTER, press c/d to select "Yes", and then press
ENTER.

ECO menu

ECO Setup
No Signal Off
4
Power Management
No Operation Off
Ecology
H No Signal Off
You can set the TV to automatically power off in
about 15 minutes after the TV goes into a state of
receiving no programme signals, such as the end of
a broadcast day. (Enable, Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
9 10
NOTE
• "Disable" is the factory preset value.
• When a TV programme fi nishes, and the TV receives signal
Setup
input, this function may not operate.
H Power Management (PC input mode only)
+15
You can set the TV to automatically power off when
+15
no image is displayed on PC.
R
[Off ]
Selected item
Off • No power management
• Factory preset value.
Mode1 • If no signal inputs for approximately 8
minutes, the power shuts down.
• Even if you start using the PC and the
d button
signal inputs again, the TV stays off.
• The TV turns on again by pressing
For stronger treble
POWER. (See page 6.)
For stronger bass
Mode2 • If no signal inputs for approximately 8
Decrease audio
seconds, the power shuts down.
from the left
• When you start using the PC and the
speaker
signal inputs again, the TV turns on.
• The TV turns on again by pressing
POWER. (See page 6.)
H No Operation Off
You can set the TV to automatically power off when
no TV operation is performed for more than 3 hours.
(30 min., 3 hr., Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• "Disable" is the factory preset value.
H Ecology
When set to "Yes", the TV activates the following
power saving mode.
• "OPC" set to "On" (Page 9)
• "No Signal Off" set to "Enable" (Page 10)
• "Power Management" set to "Mode1" (Page 10)
• "No Operation Off" set to "3 hr." (Page 10)
• "Quick Start" set to "Off" (Page 12).
Option
[Disable] NOTE
• Ecology mode cannot be deactivated by selecting "No".
[Disable] Each setting must be changed individually to deactivate
Ecology mode.
Description