Pioneer DVD-V7200 Operating Instructions Manual page 39

Item
Class
AUTO
SUBT.OFF
(Subtitle off)
ASPECT
DIG. OUTPUT
(Digital output)
DOWN SAMP
(Down sample)
Returning changed settings to the original settings (initialization)...
Verify that the power is turned OFF. With the power OFF, press both the
Item Settings
Details
ON
AUDIO and SUBTITLE can be set in advance.
In the case of foreign movies, the original audio language
and English subtitles are automatically selected
In the case of English language movies, the original audio
language (English) is selected, and subtitles are not
displayed
On some discs, this function may not operate as described
above.
If AUDIO and SUBTITLE differ or DISPLAY and ASS.SUBTIT
of the SUBTITLE are OFF, it is the same as turning it OFF.
But, changing settings during playback using "Selecting
Languages" (page 28) and "Selecting Subtitle Language"
(page 29) is possible.
OFF
Regular subtitle and audio settings are selected
A subtitle can be set while the subtitle is set to OFF.
SEL SUBTL: The selected subtitle language will be selected.
WITH AUDIO: The selected audio language will be selected.
When viewing software recorded in the wide mode, the
image's height to width ratio can be switched to match the
TV being used.
This player lets you change the audio output via PCM/
of the coaxial digital output jack. DVD conforms to both
Dolby Digital (three-dimensional sound for movies etc.) and
Linear PCM (digital sound with higher fidelity than CD) audio
standards.
96kHz: PCM audio discs with a 96kHz sampling frequency
can be played back at the 96kHz high quality sound setting
while 48kHz discs will be played back at 48kHz
48kHz: Discs with a 96kHz sampling frequency can be
played back at a compressed 48kHz with this setting and
48kHz discs will be played back at 48kHz
÷ When the audio sampling frequency recorded on the disc
is set as desired, output toggles between analog and
digital output
÷ When the 96KHz setting is selected for a disc with copy
protection, the signal is blocked from the digital output
terminal
Settings
Initial settings
(factory settings at
the time of shipment)
ON
SEL SUBTL
WIDE
PCM
/DOLBY DIGITAL
Automatically selects
Linear PCM or Dolby
Digital depending on
the audio signal
(when an amp that
includes a Dolby
digital [C-3] decoder
is used)
96kHz
1
4 button and the button.
Changing Settings
OFF
WITH AUDIO
PAN&
LETTER
SCAN BOX
PCM
Provides Linear
PCM sound with
both Dolby Digital
and Linear PCM
sources (when a
regular amp or
Dolby Pro logic amp
is used)
48kHz
39
<VRB1185>