Bluetooth Operation - Polk Audio hampden User Manual

Bluetooth
Select Bluetooth as the source, and the following sequence occurs until a connection is completed:
1. The speaker attempts to connect to the last connected Bluetooth device.
2. The speaker enters "discovery mode" and is available to pair and/or connect to any Bluetooth
device. (After 20 minutes, the system goes into sleep mode.)
3. Regardless of the active source (other than Bluetooth), the speaker will always be in discovery
mode and ready to connect to any previously paired device while the system is on.
Note: When you pair/select Bluetooth from a Bluetooth device, the loudspeakers will go into
Bluetooth source even though another source (USB, AUX) has been selected.
Note: The last connected Bluetooth device connects when Bluetooth source is selected.
Whenever Bluetooth is connected, the Bluetooth source LED is solid Blue;
and there will be an ascending tone.
The loudspeakers will disconnect and enter into "discovery mode" for 20 minutes when any of the
following occur:
1. Press and release the source button.
2. The Bluetooth source device disconnects.
8
operation
®