Polk Audio LSi25 Owner's Manual

Polk Audio LSi25 Owner's Manual

Lsi series floorstanding loudspeaker
Hide thumbs Also See for LSi25:

Advertisement

LSi 25
Floorstanding Loudspeaker
Owner's
Manual

Advertisement

Table of Contents
loading

Summary of Contents for Polk Audio LSi25

  • Page 1 LSi 25 Floorstanding Loudspeaker Owner’s Manual...
  • Page 2: Important Safety Instructions

    Contact Polk Audio Customer Ser vice 1-800-377-7655 (Outside US: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM Eastern Time, polkcs@polkaudio.com IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions.
  • Page 3 LSi SERIES FROM POLK AUDIO The LSi Series from Polk Audio is the ultimate expression of the performance principles that have made Polk Audio a world leader in loudspeaker technology. The LSi Series features patented Polk Audio technologies reengineered for the new millennium. From reformulated Dynamic Balance cones, to ring radiator tweeters, the LSi Series is for serious listening.
  • Page 4 Lautsprecher-Draht durch das Loch schieben Contact Polk Audio Customer Ser vice 1-800-377-7655 (Outside US: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM Eastern Time, polkcs@polkaudio.com FIGURE 1 Consult serial number label for correct speaker orientation. Consulte la etiqueta del número de serie para establecer la orientación correcta del altavoz.
  • Page 5 Signals fed to this input will pass through the variable Low Pass Crossover (Frequency control) built into the LSi25’s subwoofer amplifier. This is the input to use when using Hook Up Option 2. The “LFE IN” jack bypasses the Low Pass Crossover.
  • Page 6 HIGH LEVEL HIGH LEVEL INPUT INPUT SUB OUT SEPARATE SUB (OPTIONAL) HIGH LEVEL HIGH LEVEL INPUT INPUT FIGURE 5 Option 1, recommended for most systems. BASS MANAGEMENT SETTINGS: Front = Large Opción 1, recomendada para la mayoría de los sistemas. PARÁMETROS DE CONTROL DE BAJAS FRECUENCIAS: Front = Grande (Large) Option 1, recommandée pour la plupart des systèmes.
  • Page 7: Subwoofer Volume Control

    (even if the speaker is set to “Off”). We meant it that way. In the “Auto” position, the amplifier will automatically turn on as soon as the speaker senses a signal coming from your pre-amp, integrated amp or receiver. It will automatically turn off several minutes after signals cease to be sent by your pre-amp, integrated amp or receiver.
  • Page 8: Limited Five Year Warranty

    This warranty is in lieu of all other expressed Warranties. If this Product is defective in materials or workmanship as warranted above, your sole remedy shall be repair or replacement as provided above. In no event will Polk Audio, Inc. be liable to you for any incidental or consequential damages arising out of the use or inability to use the Product, even if Polk Audio, Inc. or a Polk Audio Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party.

Table of Contents