What's In The Box; Getting Started - Polk Audio omni S2 User Manual

What's in The Box

• Omni S2
• Power cable
• Additional grille
• User Guide
2

Getting Started

Your Home Network
In general, Wi-Fi is the wireless streaming of data over a network.
Here, Wi-Fi audio is the streaming of music throughout a home
network by connecting multiple speakers and/or devices together.
The controller for the Polk Omni Collection is the Polk Omni App,
which sends music information to each DTS Play-Fi enabled
speaker or device.
System Requirements
It all begins by building a wireless home network, preferably one
with a high-speed Internet connection. Here's what you'll need to
connect your S2 to your network:
• A Wireless Network connected to the internet with an
802.11g router or better*.
• An Android device with version 2.2 operating system or
newer OR an iOS device with version 6.0 operating system
or newer.
• The password for your wireless network (if required).
*Router type is usually listed on the router, itself. Please call the Polk Preferred
Services @ 1-800-638-7276 for further questions related to router type
1. www.polkaudio.com
For The Best DTS Play-Fi Experience
To ensure your system is operating under the best environment
possible, here are a few additional tips:
• For the fastest streaming performance, especially when
connecting to multiple speakers simultaneously, an 802.11n
router or better is recommended.
• Ensure the DTS Play-Fi device is within wireless reach of your
router, or that the signal is not hindered by concrete, brick,
or other dense walls. The quality of your connection can be
observed in the Polk Omni App by the Wireless Strength icon.
S2 Buttons
On/Off Plug in the power cord, the S2 powers on.
Play/Pause button The button with the Polk logo on it
Status indicator Two on the front, on either side of the
Play/Pause button. To the left is AUX, to the right Wi-Fi. For an
explanation of the LED indicators, see "LED status explanation."
Volume up (+) Volume down (-) Press these buttons to adjust
the volume up and down.
AC power input (100 - 240V, 50/60 Hz) Use only the supplied
power brick to connect to a power outlet (a third-party power
supply voids your warranty). Insert the power cord connector firmly
into the S2 until the connector sits flush.
.
Controls
AUX Mode
Volume Up
Volume Down
Play/Pause
Wi-Fi Mode
3