Special Notices On Screen Status Display Codec Connecting an External Amplifier Connecting an External Amplified Speaker Supported Resolutions Explanation of Various Picture Control Settings Fine Tuning Under RGB/HDMI Mode Explanation of Various System Settings Specifications Timing For Component RJ-45 Connection Command Format and Sequencing Dimensional Drawings...
Page 3
WARNING / ATTENTION Risk of Electric Shock. Do Not Open! Risque de choc électrique. Ne pas ouvrir! WARNING : To reduce the risk of electric shock, do not remove the front or back covers. No user-serviceable parts inside. Refer servicing to qualified service personnel only. AVERTISSEMENT : Pour réduire le risque de choc électrique, ne pas retirer les couvercles avant ou arrière.
Disconnect the unit from the main supply and refer servicing to qualified service personnel under the following conditions : Power cord or plug is damaged or frayed. Liquid has been spilled into the product and/or the unit has been exposed to water or moisture. Unit does not operate normally when the operating instrucions are not followed.
Overview Checking the Accessories Supplied 55” LED DISPLAY イ イ ンチ チ ン デ デ ィ ィ スプ プ レ ス レイ イ 55” LED 디 디 스 스 플 플 레 레 이 이 СД-ТЕЛЕВИЗОР С ДИАГОНАЛЬЮ 55" MONITOR LED 55” 吋...
Page 7
RJ-45 a Codec or PC video connector. *The USB port is labelled. It is provided for after service/engineer use ONLY.
Page 9
To access the OSD menu, press “MENU” OSD Menu button on the remote control or on the OSD Menu Navigation Access rear cover. Navigation through the OSD menu can be accomplished by using the “Left/Right” or “Up/Down” keys on remote control or rear cover. After changing settings on the OSD menu, the new settings are confirmed automatically when OSD picture vanishes.
Connecting an External Amplifier Connecting an External Amplified Speaker...
Page 12
Installation Connecting a PC (con’t) Setting Up Your Display Using Plug and Play This display adheres to VESA Plug and Play standard to eliminate complicated and time consuming setup of displays. This display identifies itself to the computer and automatically sends the PC its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols.
Page 14
“Left/Right” keys Note that the default Picture Mode setting is set to “POLYCOM”. This setting is standard mode, which is optimized (and recommended) for use with POLYCOM video conferencing systems (and is applicable to all video inputs). As such, many of the adjustment sub-settings are “grayed-out”...
Increasing NOISE REDUCTION HDMI RGB RANGE until your video picture is optimal. Picture Quality Adjustment (RGB/HDMI Mode) Picture Quality Adjustment (RGB Mode)
This display is capable of displaying a wide-screen image on the screen. However, not all available video content fits perfectly in a wide-screen (16:9) format resulting in unused screen space. This display is capable of displaying images in various formats that is suitable for various types of content depending on its size.
Additional Information Dimensional Drawings Item Color Scheme Black Outer Front Bezel...
Page 26
Additional Information PME55MA EXPLODED VIEW (MECHANICAL PARTS) ITEM PART NO. DESCRIPTION UNIT REMARKS PME55MA TLABD2003Y1B--- SERIAL LABEL TLABM1920Y1---- MODEL LABEL YTAPEQ075T900-- TAPE PE BAG SSAKH0203Y1---B EPE FOAM SPAKA0918Y1---- USER MANUAL TINSE2240Y1---- ACCESSORY KIT SSAKD0003Y1-T-C DATA BAG ACCESSORY KIT BATTERY ACCESSORY KIT RBATB0226Y1DD-- ACCESSORY KIT YRC-294POLYCOMC...
Need help?
Do you have a question about the 55” LED DISPLAY and is the answer not in the manual?
Questions and answers