Table of Contents
Advertisement
FIREPLACE INSTALLATION
S
AFETY
SAFETY BARRIER INSTALLATION
INSTRUCTIONS
NOTE: A barrier designed to reduce the risk of burns
from the hot viewing glass is provided with this
appliance and shall be installed for the protection of
children and other at risk individuals. If the barrier
becomes damaged, the barrier shall be replaced with
the manufacturer's barrier for this appliance.* Any
safety screen, guard, or barrier removed for servicing
the appliance must be replaced prior to operating the
appliance.
* See parts list for model number.
1. Remove screen from packaging.
2. Align the four tabs on the sides of the screen frame
(two top, two bottom) Figure 40 with the correspond-
ing slots on the firebox. Figure 41
3. Slide the screen down into the slots until it fits secure-
ly in place.
NOTICE: It is the responsibility of the installer to ensure
the barrier is affixed to the fireplace at the time of instal-
lation.
Figure 40 -
Barrier Screen Install
20306746
CERTIFIED
B
ARRIER
WDV See-thru Gas Fireplace
WARNING: The safety screen barrier
must be installed after the glass front is
in place. It is NOT a replacement for the
glass and the unit must NOT be oper-
ated without the glass in place.
DANGER
A barrier designed to reduce the risk of burns from
the hot viewing glass is provided with this
appliance and shall be installed.
DANGER
Une barrière visant à réduire le risque de brûlure
par le hublot chaude est fournie avec cet
appareil et doit être installé.
Slots (Qty: 4.
Two per side)
Figure 41 -
Screen Slot Placement
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Un panneau vitré chaud peut
causer des brûlures.
Laissez refroidir le panneau
vitré avant d'y toucher.
Ne laisser jamais les enfants
toucher le panneau vitré.
Slot
29
Advertisement
Table of Contents
